Uniden DCT 4960 Скачать руководство пользователя страница 48

Страница: 48 / 54

A D D I T I O N A L I N F O R M AT I O N

[ 42 ]

Symptom

“Out of Range” displays on
the LCD

No Caller ID data is displayed

No Call Waiting Caller ID

“Private”, “Unavailable”, or
“No Name” message is
displayed

During a Call Waiting Call, the
speaker mutes temporarily

A second handset can’t join
the conversation

Voice Message Indication does
not work

If you still have a problem

Suggestion

• The handset is too far away from the base unit. Move closer to the

base unit.

• Confirm with your telephone company that you are subscribed to

Caller ID service.

• The handset was picked up before the second ring.

• Charge the handset.

• Confirm with your local telephone company that you are subscribed

to Call Waiting Caller ID. Even if you have subscribed to Call Waiting
and Caller ID services separately, you may need to initiate the
combined Call Waiting Caller ID service.

• All or part of the Caller ID information is not being sent. The

information is either unavailable or is being blocked by the caller.

• This is normal operation. The speaker must be muted briefly to allow

the phone to receive Call Waiting Caller ID information.

• Only one handset at a time can talk with an outside caller. To allow

a different handset to talk to the caller, transfer the call to the other
handset.

• Contact your local telephone company to make sure that your

telephone line receives FSK message signaling.

• Call our customer hotline at 1-800-297-1023.

DCT4960-2 OM_ENG 9/18/01 4:25 PM Page 42

Содержание DCT 4960























































Результаты поиска

Содержание DCT 4960

Отзывы:

Похожие инструкции для DCT 4960

Бренды по названию

Популярные бренды

Uniden DCT 4960, Руководство пользователя

Результаты поиска

Содержание DCT 4960

Отзывы:

Похожие инструкции для DCT 4960

Бренды по названию

Популярные бренды