4 - English
For desktop use
For wall mount use
WALL
DESK
DESK
WALL
WALL
DESK
WALL
DESK
2. Plug the AC adapter into a standard 120V AC power outlet, and connect the
telephone cord to a standard telephone wall jack.
3. If you are mounting the phone on the wall, place the mounting slots over the pins
on the wall plate; slide the base down to lock it into place.
Test the Connection
Pick up the corded handset from the base. You should hear a dial tone and the
display on the base should say
Talk
. When you get a dial tone, make a quick test call.
If...
Try...
the display says
Check TEL Line
or
you don’t hear a dial tone
checking the connection between the
base and the phone jack.
you keep hearing a dial tone
changing to pulse dialing.
Changing to Pulse Dialing
Your phone uses tone dialing by default. If your phone company uses pulse dialing,
you need to change your phone’s dial mode.
1. Press
Menu
and choose
Global Setup
.
2. Select
Dial Mode
then
Pulse
. You’ll hear a confirmation tone.
To send DTMF tones during a call (e.g., for an automated response system), press
*
to temporarily switch to tone dialing. When you hang up, the phone automatically
returns to pulse dialing.
Set Up the Accessory Handsets
Install and Charge the Battery
1. Unpack all handsets, battery packs, and battery covers.
If you need to remove a cover, press in on the notch and
slide the cover down and off.
2. Line up the battery connector with the jack inside the
handset; the connector only fits one way.