English - 21
To...
From the base, press...
From a cordless
handset, press...
make an intercom page
interCOM/finD Hs.
interCOM/Clear.
Select the station you want to talk with or
All
to page
all stations at the same time.
cancel a page
interCOM/finD Hs
or hang
up the corded handset.
enD.
answer a page
HOMe
or pick up the
corded handset.
interCOM/Clear
or
HOMe/
flasH.
end an intercom call
interCOM/finD Hs
.
enD.
Finding a Lost Handset
You can use the intercom to page a lost handset. When the intercom tone sounds,
you can track the tone to the lost handset.
Chain Dialing
If you often have to enter a series of digits or a code number during a call, you can
save that code number to a phonebook entry and use the phonebook to send the
code number.
1. Enter the code number (up to 32 digits) into the phonebook just like a regular
phonebook entry. Be sure to enter the code number into the phonebook exactly
as you would enter it during a call.
2. When you hear the prompt that tells you to enter the number, open the
phonebook and find the entry that contains your code number.
3. Press
Menu/seleCt
(handset) or
seleCt
(base) twice to send the code. If you change
your mind, just close the phonebook.
Voice Message Notification
If you subscribe to a land line’s voice mail service, your phone can notify you when
you have a new message. This feature supports Frequency-Shift Keying (FSK)
notification. Contact your voice mail provider for information.
When you have new messages, the display shows a message icon. To access your
voice mail, press
Message/Mute
on the handset; select
Voice Mail
.
#
When you select
Voice Mail
, you will be prompted to enter a Voice Mail
Access number if you have not yet set one up (see p. 12). If you have
already set one up, your phone will dial it.
After you listen to your messages, the message icon turns off. If it doesn’t, you can
reset it: With the phone in standby, open the menu and select
Global Setup
; select
VMWI Reset
, then select
Yes
.