28 - English
Resetting Stations
If you have problems with the base,
unplug the base to reset it. Plug it back
in after at lease a minute. If you have
problems with a cordless handset or
want to replace one, reset it:
1. Press & hold
enD
and
#
at the same
time until you see the
System Reset
menu.
2. If you still have the base the handset
is registered to, select
Deregister HS
,
then select the handset you want
to reset. If you don’t have that base
anymore, select
Base Unavailable
.
3. To confirm, select
Yes
. The handset
displays
Handset not registered
.
Registering Handsets
If you see a “not registered” message on
a handset, you must register it to a base
before using it.
1. On the base, open the menu and
select
Register Accy
.
2. On the handset, press and hold #; the
handset displays
Registering
.
3. Wait until the display says
Registration Completed
(about 30
seconds), then pick up the handset;
press
HOMe/flasH
.
#
If you don’t hear a dial tone or
the display says
Registration Failed
,
charge the battery completely,
then try again.
Adapter and Battery Information
AC adapter Base
Charger
Part number
PS-0034
PS-0035
Input voltage
120V AC, 60 Hz
Output voltage 7.8V AC @
450mA
8V AC @
300mA
x
Use only the supplied AC adapters.
x
Use the proper adapter for the base & any
chargers.
x
Do not place the unit in direct sunlight or subject
it to high temperatures.
Battery pack (with normal use)
Part number
BT-1031
Capacity
400mAh, 2.4V DC
Talk time
about 7 hours
Standby time
about 7 days
Battery life
about 1 year
x
Replace the battery when the talk or standby time
becomes noticeably reduced. For replacements,
call the Parts Department (see the front cover).
x
When the battery gets low, the handset beeps and
shows a low battery alert; put the handset in the
cradle for recharging.
Rechargeable Battery Warning
x
This equipment contains a rechargeable Nickel-
Metal-Hydride (Ni-MH) battery.
x
Nickel is a chemical known to the state of Califor-
nia to cause cancer.
x
Do not short-circuit the battery.
x
The batteries in this equipment may explode if
disposed of in a fire.
x
Do not charge the batteries in any charger other
than the one specified in the owner's manual.
Using another charger may damage the battery or
cause it to explode.
As part of our commitment to protecting our
environment and conserving natural resources,
Uniden voluntarily participates in an RBRC®
industry program to collect and recycle used
Ni-MH batteries within the United States. Please
call 1-800-8-BATTERY for information on Ni-
MH battery recycling in your area. (RBRC® is a
registered trademark of the Rechargeable Battery
Recycling Corporation.)
Rechargeable batteries must be recycled or
disposed of properly.
Warning! The cords on this product and/or
accessories contain lead, a chemical known
to the state of California to cause birth
defects or other reproductive harm. Wash
hands after handling.
Uniden works to reduce lead content in our
products & accessories.
Compliance Information
FCC Part 68 Information
This equipment complies with Part 68 of the FCC
rules and the requirements adopted by the ACTA.
On the bottom of this equipment is a label that
contains, among other information, a product
identifier in the format US: AAAEQ##TXXXX.
If requested, this number must be provided to the
phone company.