Manual – 2024F Neon Bore Hole Telemetry Module
Unidata Manual - 2024F Neon Bore Hole Telemetry Module - 20 04 2016.docx
Page 17
7.4 Battery
Connection
For safety reasons the NBHTM is shipped without the internal lithium battery pack
connected. It must be connected during commissioning of the instrument. The battery
can also be replaced when depleted. Perform the following steps to connect or change
the battery:
1) Locate the battery connector on the circuit board.
2) Depress the locking tab on the wire end and slide the connector out of the socket.
