Manual – 2024F Neon Bore Hole Telemetry Module
Unidata Manual - 2024F Neon Bore Hole Telemetry Module - 20 04 2016.docx
Page 10
6.0 NBHTM
COMMISSIONING
Once the NBHTM has been installed and all connections made, field commissioning can
be conducted. Ensure that a SIM card has been installed (see next section).
Commissioning tests may be performed as follows.
6.1
NBHTM Powered On
Confirm that the status LED, visible through the transparent window on the front of the
unit, is flashing. With the NBHTM in an idle state the LED will flash faintly once every
second.
6.2
NBHTM Confirm Configuration
Confirm proper configuration by connecting the NBHTM to a laptop computer running
StarlogV4.
Launch the STARLOGV4 (laptop computer) application.
Press the ‘Select’ icon and select the scheme corresponding to the NBHTM
Click on the ‘Configure/Initialise’ button to open the “NRT/NMM Configuration Tool”
dialog
Press the ‘Retrieve NRT Settings’ button at top right of the dialog
Confirm that the correct Server IP address has been configured
Confirm that the correct NRT ID (XRTID) has been configured
Check the firmware version and NRT Model type
If all checks are confirmed, the NBHTM may be Initialised
