Unicum NERO TOUCH Скачать руководство пользователя страница 77

Страница: 77 / 115

User manual for NERO TOUCH, NERO TOUCH INSTANT

page 77

Version 1.1 / December 2017

ТМ

NAME

DESCRIPTION

VALUE

Heating time (in minutes)

Here the time for rising the boiler temperature from

the specified in the

Maximum coffee tempera

ture

setting is specified. Before this time pass the

boiler temperature will gradually increase from

minimum

Minimum coffee temperature

setting

to maximum

Maximum coffee temperature

set-

ting in proportion to the time passed. If 0 is speci-

fied, then the boiler temperature is always held on

the level, specified in the

Minimum coffee tem-

perature

setting. Timekeeping (during which the

temperature starts rising) will start after making a

coffee-based drink. The time is specified by the

Heating delay

setting.

Enter number

Minimum solubles temperature

Here the minimum permissible temperature for

making the instant drinks (or hot water) is set.

The vending machine starts making coffee if the

actual temperature differs downward from the

temperature, specified here by no more than 3

degrees. Otherwise, before making coffee, the

vending machine waits for the boiler to heat up.

The upward difference is not limited. It should be

noted that between making drinks the tempera-

ture in the boiler is maintained in accordance with

the

Minimum coffee temperature

setting.

This setting comes into effect only at the moment

of instant drink making. Temperature, specified

here, shouldn’t be higher than the temperature,

specified in the

Minimum coffee temperature

setting.

Enter temperature

Steam boiler temperature

Steam boiler temperature setting for the vending

machine with fresh milk option (FRESH MILK)

Enter temperature

Show temperatures

•

Included

- Boiler heating temperature dis-

play on the vending machine screen when in

vending mode is ACTIVATED.

Included

Disabled

Buttons (see fig.9.17 pos.1):

Cool Boiler

- Automatic boiler cools due to pumping cold water through it to a temperature of 45 degrees.

Empty Boiler

- The machine empties the boiler, after the devastation of the boiler must be switched off, un-

screw the bottom hose and turn on the machine (following the inclusion of machine translated it into service mode,
where it will open the valve by pouring water through the rest of the bottom of the boiler).
3.

fill Boiler

- The machine fills the boiler. If the boiler does not have time to be filled during pump operation - 30 sec.,

The cycle repeats until discharge water into the canister waste

Содержание NERO TOUCH




















































































































Результаты поиска

Содержание NERO TOUCH

Отзывы:

Похожие инструкции для NERO TOUCH

Бренды по названию

Популярные бренды

Unicum NERO TOUCH, Руководство пользователя

Результаты поиска

Содержание NERO TOUCH

Отзывы:

Похожие инструкции для NERO TOUCH

Бренды по названию

Популярные бренды