Unicum NERO TOUCH Скачать руководство пользователя страница 11

Страница: 11 / 115

User manual for NERO TOUCH, NERO TOUCH INSTANT

page 11

Version 1.1 / December 2017

ТМ

3.0 SAfETY

For safe operation of the vending machine comply with the requirements given in this manual.

3.1 Main provision

•

Before putting the vending machine in service always make sure that the operating instructions given

in this manual were read and understood.

•

Comply with the instructions given in this manual for vending machine transportation, installation,

maintenance, and service.

•

The vending machine is not intended for operation by persons (including children) with physical, sen-

sory or intellectual limitations or without the proper experience and/or knowledge, if only they are not

under the supervision of the person, responsible for their safety, or if only they were trained for the

vending machine operation.

•

Damaged power cords should be replaced by the manufacturer only.

•

Make sure that the vending machine is installed on a stable horizontal surface.

•

Make sure that there’s no less than 80 mm of free space behind the vending machine for air circulation.

• The vending machine is intended for use in dry premises with ambient air temperature no less than 10 °С.

•

The vending machine uses hot water. Don’t get too close to the vending machine when making a drink.

•

Use only cooled fresh long-storage milk (pasteurized, UHT) with 2.5 - 3.6% fat. The milk should be

stored at a temperature from 3.5 to 7°С. For vending machines with FRESH MILK option only.

•

For cleaning of the vending machines use only cleaning agents approved for foodstuff.

•

Make sure that the vending machine is cleaned daily to avoid hazards for the consumer.

•

The vending machine should be serviced by skilled service technicians only.

•

The use of the service key is reserved for skilled service technicians only. When the service key is

inserted in the vending machine, the safety device is switched off. Caution - the danger of injury!

•

The power supply plug should be easily accessible.

•

Never insert the plug into an outlet if it’s wet or by wet hands.

•

Use genuine spare parts only.

•

Making changes in the vending machine is prohibited. In such cases, the manufacturer bears no re-

sponsibility for any damages!

Содержание NERO TOUCH




















































































































Результаты поиска

Содержание NERO TOUCH

Отзывы:

Похожие инструкции для NERO TOUCH

Бренды по названию

Популярные бренды

Unicum NERO TOUCH, Руководство пользователя

Результаты поиска

Содержание NERO TOUCH

Отзывы:

Похожие инструкции для NERO TOUCH

Бренды по названию

Популярные бренды