FOODBOX TOUCH, FOODBOX LONG TOUCH, FOODBOX LIFT TOUCH
Page 46
Version 1.3 / December 2018
Before loading the coin drawer navigate to this menu item. Then conduct loading coins via the coin
slot, located at the vending machine door.
In the left lower corner the coin drawer statistic is shown.
Important information you should take into account when loading the coin drawer:
-coins fallen down to the cashbox during loading stay in the vending machine in a form of receipts;
-when using telemetry the removal of cashbox or stacker is prohibited when on this screen;
-when using telemetry all cash (in cashbox or stacker) should be encashed either before or after
loading. E.g., it’s prohibited to remove the stacker before the cash drawer loading, and to remove the
cashbox after the loading.
On the Cash drawer screen next to the tube coins the special tube symbol is displayed. There’s no
such symbol next to the non-tube coins.
There are 3 conditions of tubes indicated by corresponding icons: normal (not full and not jammed),
full and jammed.
buttons on the Coin drawer screen:
1. Test Change Motor - when pressing this button the change motor test is performed.
2. Exit Menu - exit the menu to navigate to the user interface;
3. Reset Errors - reset the active errors;
4. Signal Mainten - sending collection data to the telemetry server. Usually, there’s no need to use
this function because collection data are sent to the server automatically when loading the coin receptacle /
removing the cashbox / removing the stacker.
The button is used when the vending machine is operating without payment systems, or if the
cashbox/stacker sensors are absent or faulty.
