Unicum Foodbox Touch Lift, Руководство пользователя

Страница: 39 / 59

FOODBOX TOUCH, FOODBOX LONG TOUCH, FOODBOX LIFT TOUCH
Page 39 Version 1.3 / December 2018
ТМ
SETTING DESCRIPTIoN VALUE
optosensor
Activation/deactivation of photo-sensors, register -
ing the falling product. This parameter should be
in the
Disabled
state if the vending machine has
no photo-sensors. If the photo-sensors are deacti-
vated the vending machine considers the sale suc-
cessful each time the motor was able to complete
one turn to zero position. If the photo-sensors are
activated the vending machine considers the sale
successful only if the photo-sensors registered the
falling product. With the deactivated photo-sen-
sors, no additional rotation is carried out.
Enabled /
Disabled
Wide Snack
This setting selects whether the vending machine
is wide (
FOODBOX LONG TOUCH
) or narrow
(
FOODBOX TOUCH, FOODBOX LIFT TOUCH
).
For wide vending machines, this setting should be
in
Yes
position, and for narrow – in
No
.
No /
Yes
Try to start blocked motor Selection of actions for the case when the motor
couldn’t reach the zero position (e.g., because of
the mechanical obstruction).
If the Yes is selected, the vending machine re-
peats an attempt to make another turn (after a
small delay).
No /
Yes
Max cell additional turn The setting of maximum additional rotation of spi-
ral for the case when the product had never fallen
past the photo-sensors after the motor reached
the zero position. If the product had never fallen
even after the additional rotation of the spiral,
then the sale is considered completed with an er-
ror. The setting makes no difference for vending
machines without any photo sensors installed,
sensors, disabled by settings or faulty sensors.
1/2
3/8
1/4
1/8
Additional rotation step The setting of a pitch for additional rotation of a
spiral in the case when the product didn’t fall. After
each pitch, there will be a small delay, during which
the vending machine will wait for the product to fall
past its photo-sensors. The additional rotation will
end after the total number of additional rotations
will reach the value, specified in the Max cell ad-
ditional turn setting. E.g., if in the Max. additional
rotation of spiral setting has a set value of 1/2, and
in the Additional rotation step setting – 1/8, then
in the process of giving out the product the vend-
ing machine will carry out no more than 4 addition-
al rotations, the size of each additional rotation is
1/8 spiral revolution (1/8+1/8+1/8+1/8 = 4/8 = 1/2).
This setting makes no difference if the photo sen-
sors are faulty or disabled.
1/2
1/4
1/8