background image

14

K-Series | Version 1.03

Spare parts

10 Spare parts

10.1 Ordering spare parts

The spare parts may be purchased with the authorised 
dealer or directly with the manufacturer. Please find the 
corresponding contact data in Chapter 1.2 Customer 
service.

Indicate the following basic information for requests or 
orders of spare parts:

- Type of device
- Item No. 
- Position No.
- Year of construction:
- Quantity
- Required mode of dispatch (mail, freight, sea, air, 

express)

- Address of dispatch

Spare part orders which do not include the above indi-
cations may not be taken into consideration. If the indi-
cations regarding the mode of dispatch are missing, the 
product is dispatched at the discretion of the supplier. 

You will find information regarding the device type, item 
No. and year of manufacture on the type plate fixed to 
the chain hoist.

Example

The ratchet disc for the chain hoist must be ordered. 
The ratchet disc has number 17 in the spare pars dra-
wing.

- Type of device:   

Chain Hoist K 1001

- AItem number:     

6171001

- Position number:  

17

The order No. is: 

0-6171001-17

The order number consists of the item number, the posi-
tion number and one digit in front of the item number. 

- Place the digit 0 in front of the item No. 

- Also place the digit 0 in front of the position No 1 
through 9.

DANGER!
Danger of injury by the use of wrong spare 

parts!

Dangers may result for the user and damages as 
well as malfunctions may be caused by using wrong 
or damaged spare parts.
-  Only use original spare parts of the manufacturer or 

spare parts admitted by the manufacturer.

-  Always contact the manufacturer in case of uncer-

tainties.

Tips and recommendations

The manufacturer's warranty will become null and 
void if non-permissible spare parts are used  

Содержание 6171001



















Отзывы: