3.4.14 Product bowl
See Fig 3-1 (5) and Fig 3-5 (5)
a)
Remove the Product and Security Flaps as above.
b)
After removing all packs from the top shelf, remove and save the socket-cap security
screw (central and immediately above the shelf).
c)
Lift the dispenser from the wall and place on its right side with the door open.
d)
Remove the two screws from the back holding the Product Bowl and remove the Bowl.
e)
Place a new Bowl into the dispenser, replace and tighten the two retaining screws.
f)
Re-hang the dispenser on the wall brackets and replace the socket cap security screw.
g)
Replace the packs from the top shelf.
h)
Replace the Product and Security Flaps.
i)
Carry out the Machine Checking Procedure (Section 2) to ensure that the system is
fully operational.
Содержание Multivend
