![Unicorn Computer ENDAT-9401F/H Скачать руководство пользователя страница 26](http://html1.mh-extra.com/html/unicorn-computer/endat-9401f-h/endat-9401f-h_user-manual_3744525026.webp)
User’s Manual
45
Appendix B: LCD Pin Assignment
LVDS1:
Dual Channel
LVDS (2.54mm)
Pin No.
Signal
Pin No.
Signal
1
VBL (+12V)
2
VBL (+12V)
3
GND
4
GND
5
DISP.ON/OFF
6
GND
7
LVDD
8
LVDD
9
GND
10
GND
11
RxO0+
12
RxO0-
13
RxO1+
14
RxO1-
15
RxO2+
16
RxO2-
17
RxO3+
18
RxO3-
19
RxOC+
20
RxOC-
21
GND
22
KEY
23
RxE0+
24
RxE0-
25
RxE1+
26
RxE1-
27
RxE2+
28
RxE2-
29
RxE3+
30
RxE3-
31
RxEC+
32
RxEC-
33
LVDD
34
LVDD
35
GND
36
GND
37
GND
38
GND
39
VBL (+12V)
40
VBL (+12V)
Please make sure the Pin 1 location before inserting the LCD connector.
BIOS LCD panel type list (Advance Chipset Setup/Panel Type)
Panel Number
1024x768 24Bit 1CH
1280x1024 48Bit 2CH
1280x768 24Bit 1CH
1366x768 24Bit 1CH
46
The ENDAT-9401F/H System Board
Appendix C: Limited Warranty
Standard two years limited warranty on all our ENDAT series all-in-one
motherboards and embedded boards. Products that become defective during the
warranty period shall be repaired, or subject to manufacturer’s option, replaced.
The limited warranty applies to normal proper usage of the hardware and does not
cover products that have been modified or subjected to unusual electrical or
physical stress. Unicorn Computer Corp is not liable to repair or replace defective
goods caused by improper using or use of unauthorized parts. The following
situations will be charged:
1. The products during the warranty but defective caused by improper using or
artificial external pressure and result in the components damages. According to
the damage situation, the manufacturer has the rights to decide to repair or not.
The manufacturer will charge the parts/repair cost and the returning shipping
charge.
2. The products out of warranty will charge the parts/repair cost and the returning
shipping charge as per the repair status.
3. The manufacturer has the rights to decide to repair or not based on the stock of
parts for the products which are phased out of the production.
4. Please e-mail or fax the RMA Service Request Form when have the defective
products.