User’s Manual
31
3-3. Advanced Chipset Features
This section allows you to configure the system based on the specific features of
the installed chipset. This chipset manages bus speeds and the access to the
system memory resources, such as DRAM and the external cache. It also
coordinates the communications with the PCI bus.
It must be stated that these
items should never be altered. The default settings have been chosen because they
provide the best operating conditions for your system. You might consider making
any changes only if you discover that the data has been lost while using your
system.
Item
Available Options:
DRAM Timing Selectable
By SPD
System Memory Frequency
Auto
System BIOS Cacheable
Enabled
Video BIOS Cacheable
Enabled
Memory Hole At 15M-16M
Disabled
** VGA Setting **
PEG/Onchip VGA Control
Onboard VGA
On-Chip Frame Buffer Size
8MB
DVMT Mode
DVMT
DVMT/FIXED Memory Size
128MB
Boot Display
CRT
Panel Number
1024x768 24Bit 1CH
․
System Memory Frequency
This main board supports different memory frequencies depend on the CPU FSB
(Front Side Bus) and the type of DDR DIMM.
CPU FSB
DDR2 DIMM Type
Memory Frequency
667 MHz
PC2-5300/PC2-4200
667/533 MHz
533 MHz
PC2-4200
533 MHz
․
On-Chip Frame Buffer Size
This selection is supplied for legacy VGA and SVGA graphics support and
compatibility.
32
The ENDAT-9401F/H System Board
․
DVMT Mode
This field is used to select the type of DVMT mode. DVMT (Dynamic Video
Memory Technology) is an architecture that offers breakthrough performance for
the motherboard through efficient memory utilization.
FIXED
A fixed-size fragment of the system memory is allocated to the
graphics core.
DVMT
The graphics driver allocates memory as needed for running
graphics applications and is cooperatively using this memory with
other system components.
BOTH
This mode guarantees that at least 64MB of memory is available to
the graphics core, with a possibility to increase this amount to
128MB, if necessary.
․
Boot Display
This field is used to select the type of display to use when the system boots. EFP
means DVI or LCD display by main board.
CRT
Select this option if you want the system to boot the CRT display.
EFP
Select this option if you want the system to boot the DVI or LCD
flat panel display.
(Optional Item)
CRT+EFP
Select this option if you want the system to boot both of the CRT
and DVI or LCD display.
(Optional Item)
․
Panel Number
(Optional Item)
If you apply one of the standard panels shown above, select the appropriate
option according to the type of panel that you apply. Or, please contact your
dealer or sales representative for custom-made BIOS that will suit the panel that
you apply. When main board offers DVI output, this option will not be shown.
Panel Number
1024x768 24Bit 1CH
1280x1024 48Bit 2CH
1280x768 24Bit 1CH
1366x768 24Bit 1CH
