User’s Manual
39
3-6. PnP/PCI Configurations
This section describes the configuration of the PCI bus system. PCI is a system
that allows I/O device to operate at speeds nearing the speed of the CPU itself,
when communicating with its own special components. This section covers some
very technical items. It is strongly recommended that only experienced users make
any changes to the default settings.
Item
Available Options:
Init Display First
PCI Slot
Reset Configuration Data
Disabled
Resources Controlled By
Auto(ESCD)
IRQ Resources
Press Enter
PCI/VGA Palette Snoop
Disabled
INT Pin 1 Assignment
Auto
INT Pin 2 Assignment
Auto
INT Pin 3 Assignment
Auto
INT Pin 4 Assignment
Auto
INT Pin 5 Assignment
Auto
INT Pin 6 Assignment
Auto
INT Pin 7 Assignment
Auto
INT Pin 8 Assignment
Auto
․
Reset Configuration Data
Enabled
The BIOS will reset the Extended System Configuration Data
(ESCD) once automatically. It will then recreate a new set of
configuration data.
Disabled
The BIOS will not reset the configuration data.
․
Resources Controlled By
Auto(ESCD)
The system will automatically detect the settings for you.
Manual
Choose the specific IRQ in the “IRQ Resources” field.
․
PCI/VGA Palette Snoop
When set to [Enabled], multiple VGA devices operating on different buses can
handle data from the CPU on each set of palette registers on every video device.
Bit 5 of the command register in the PCI device configuration space is the VGA
Palette Snoop bit (0 is disabled).
40
The ENDAT-9401F/H System Board
3-7. PC Health Status
This screen shows the information of temperature, Fan speed and Vcore etc.
PC Health Status
Item
Available Options:
Temperature 1
45
℃
Temperature 2
45
℃
Temperature 3
45
℃
VcoreA
1.21V
VcoreB
1.05V
+3.3 V
3.31V
+5 V
5.13V
+ 12 V
11.73V
CPU Fan
0 RPM
System Fan
6692 RPM
