UB4B0M User Manua
l
12
Figure. 4-2 UB4B0M Connecting to Antenna RF Wires
Note:
The RF connector on the board is MMCX. Please select the appropriate cable according to
the packaging. The input signal gain of the antenna connector should be within 25 to 36dB. Plug
and unplug the MCX RF head vertically and the time of this operation is limited. Improper
plugging or unplugging will lead to damage to the RF head or MCX male connector head.
Step 3.
Connect the PC to EVK through serial ports.
Step 4.
Connect a 12V adapter to the EVK power source, and switch on to power
UB4B0M.
