UB482 User Manual
18
Command
Description
When restarting after power off, the calculations will repeat and a new
coordinate will be generated.
mode base lat
Lon height
Mode base lat Lon height:
Manually configure the coordinate: lat, lon, height
Example:
lat=40.07898324818,
lon=116.23660197714,
height=60.4265
Note: The latitude and longitude coordinates can be obtained through
command bestpos. Lat or lon Negative means the location is in the southern
hemisphere or in the western hemisphere
mode base
Config as base station
mode
movingbase
Config as moving base
mode rover
Config as rover (default mode)
rtcm1033
comx 10
rtcm1006
comx 10
rtcm1074
comx 1
rtcm1124
comx 1
rtcm1084
comx 1
rtcm1094
comx 1
Set port X to send differential message under base station mode. X could be
either com1, com2, or com3.
NMEA0183 Output Message
gpgga comx 1
Output GGA in 1Hz.
Output data rate could be: 1, 0.2, 0.1 are 1hz, 5hz, 10hz
；
Message types could be GGA, RMC, ZDA, VTG, NTR
gphdt comx 1
Output current heading information
Heading information includes: HDT, TRA
