UB482 User Manual
6
Figure 2-2 UB482 Mechanical Diagram
ANT1 is the primary antenna (positioning) and ANT2 is the secondary antenna
(heading). The antenna is MMCX connector. When working as a base station, only
ANT1 should be connected. When working as a rover, the direction output is the
result of the anticlockwise angle between the vector (starting from ANT1, ending at
ANT2) and True North.
2.2
Connector and Pin Definition
There are two dual rows of pin headers on UB482: 2x14 dual row, 2.0mm pitch
Figure 2-3 UB482 Pins Definition
_______________________________________________________________________________
Note:
The model number of the dual row pin header (28pin male) on the UB482 board
is: CH71283V100 from CviLux. It’s recommended t
o mate with the Molex's plug-in socket
(28Pin female), of which the model number is: 79107-7013.
_______________________________________________________________________________
_
5.6
.
0
