15
Figure 4-4 UPrecise Views
4.4.1
Operation Steps
1)
Turn on the EVK. Click
“
file - > connect
”
. Set the baud rate: the default baud rate
is 115200 bps
Figure 4-5 Connect the Serial Port
2)
Click the
“
receiver settings
”
button to configure the NMEA message output
3)
Click
“
send
” button
. It is recommended to configure GPGGA, GPGSV, and other
messages. Or in the dialog window, click on "Send all Message" to complete all
the NMEA message output (default update rate 1Hz).
4)
In the data session window right click to adjust output log font size, to stop /
resume log output, or to clear log content
5)
Configure or type commands using the UPrecise view.
