Unico UV-2802 Скачать руководство пользователя страница 3 | Manualshive

Страница: 3 / 56

background image

2

Safety:

The safety statements in this manual comply with the requirements of the
HEALTH AND SAFETY AT WORK ACT, 1974.

Read the following before installing and using the instrument and its
accessories. The UNICO UV-2802 should be operated by appropriate
laboratory technicians.

General:

The apparatus described in this manual is designed to be used by properly
trained personnel in a suitable equipped laboratory. For the correct and safe
use of this apparatus it is essential that laboratory personnel follow generally
accepted safe procedures in addition to the safety precautions called for in this
manual.

The covers on this instrument may be removed for servicing. However, the
inside of the power supply unit is a hazardous area and its cover should not be
removed under any circumstances. There are no serviceable components
inside this power supply unit. For UNICO UV-2802, avoid touching the high
voltage power supply at all times.

Some of the chemicals used in spectrophotometry are corrosive and/or
inflammable and samples may be radioactive, toxic, or potentially infective.
Care should be taken to follow the normal laboratory procedures for handling
chemicals and samples.

Electrical:

Before switching on the apparatus, make sure it is set to the voltage of the
local power supply (see Installation).

The power cord shall be inserted in a socket provided with a protective earth
contact. The protective action must not be negated by the use of an
extension cord without a protective conductor.

Warning:

Any interruption of the protective conductor inside or outside the apparatus or
disconnection of the protective earth terminal is likely to make the apparatus
dangerous.   Intentional interruption is prohibited.

Whenever it is likely that the protection has been impaired, the apparatus shall
be made inoperative and be secured against any unintended operation.

NEVER touch or handle the power supply on UNICO UV-2802 due to the high
voltage.
The protection is likely to be impaired if, for example, the apparatus

Ÿ

Shows visible damage

Ÿ

Fails to perform the intended measurements

Ÿ

Has been subjected to prolonged storage under unfavorable conditions

Ÿ

Has been subjected to severe transport stresses

«
1
2
3
4
5
...
»

Содержание UV-2802

























































Отзывы:

Нет отзывов

Похожие инструкции для UV-2802

Бренд: dbx Страницы: 2

Бренд: IFM Страницы: 2

Бренд: Yamaha Страницы: 12

Бренд: JUMO Страницы: 24

OPTIFLUX 4040 C Series

Бренд: KROHNE Страницы: 20

Бренд: Ramsey Electronics Страницы: 40

Бренд: Omega Страницы: 13

Бренд: Hanna Instruments Страницы: 12

LaserDIMENSIONMASTER 3336

Бренд: Calculated Industries Страницы: 2

Бренд: F&F Страницы: 4

Бренд: RedBack Lasers Страницы: 2

Бренд: Televes Страницы: 2

Бренд: MFJ Страницы: 9

Бренд: Banner Страницы: 4

Бренд: Hanna Instruments Страницы: 21

Бренд: Hanna Instruments Страницы: 2

Бренд: Radiation Alert Страницы: 22

Бренд: Chauvin Arnoux Страницы: 87

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды