Unico MCV85 TOTAL CLEAN & TURBO, Инструкция по эксплуатации

Страница: 36 / 116

ENGLISH
| 36 |
PROGRAMMED MODE
only for UNICO MCV80
For this type of surface there is a pre-set cleaning program, see
Chapter 6.2.
11. CLEANING UPHOLSTERY
(mattresses, sofas, car interiors, etc.)
SUCTION ONLY FUNCTION
For suction alone and depending on the surface to be treated,
connect one of the following accessories to the handle:
The 2-in-1 windows and upholstery brush without removing the
rubber insert, makes it possible to vacuum all types of fabric
practically and quickly.
The 2-in-1 suction lance (in position 2) (23) to vacuum the
tightest and hardest to reach spaces.
The Mini Turbo Brush to deep clean the fibres of the fabrics by
also removing fur and hair.
Suction nozzle to remove dust and surface dirt.
Make sure that Chapter 1 has been carried out and begin the
cleaning operations.
It is possible to adjust the suction power by moving the cursor
on the handle (4).
STEAM ONLY FUNCTION
For steam cleaning only, attached the 2-in-1 windows and
upholstery brush with the sponge cap attached (21), then connect
the 2-in-1 brush to the handle or the telescopic tube.
Make sure that Chapter 2 has been carried out and begin the
cleaning operations.
It is possible to adjust the intensity of the steam by using the +/-
buttons (see Chapter 4); for this type of surface we recommend
the minimum level of steam.
STEAM - VACUUM COMBINED FUNCTION
to sanitise and dry the surface
For steam cleaning and vacuuming, use the 2-in-1 windows and
upholstery brush with the sponge cap attached (21), then connect
the 2-in-1 brush to the handle or the telescopic tube.
Make sure that Chapters 1 and 2 have been carried out and begin
the cleaning operations.
It is possible to adjust the intensity of the steam by using the +/-
buttons (see Chapter 4); for this type of surface we recommend
the minimum level of steam.
The steam and vacuum functions can be used either at the same
time or by alternating them.
Combined use of steam and suction allows the most efficient
sanitising of the surface, dissolving dirt and removing germs and
mites; it also brightens the colour of fibres and dries surfaces more
quickly.
PROGRAMMED MODE
only for UNICO MCV85
For this type of surface there is a pre-set cleaning program, see
Chapter 6.1.
12. CLEANING BATHROOM FIXTURES,
GROUTING AND KITCHEN WORKTOPS
STEAM ONLY FUNCTION
Ensure that Chapter 2 has been followed.
12.1 Connect the concentrator accessory to the handle. For
greater abrasive action, a bristly round brushcan be attached to
the concentrator.
12.2 It is possible to adjust the intensity of the steam by using the
+/- buttons (see Chapter 4); for this type of surface we
recommend the maximum level of steam.
STEAM - VACUUM COMBINED FUNCTION
to sanitise and dry the surface
12.3 Connect the suction nozzle to the concentrator accessory (22)
and activate the suction function to begin vacuuming immediately,
removing dirt thanks to the concentrated steam jet.
PROGRAMMED MODE
only for UNICO MCV85
For this type of surface there is a pre-set cleaning program, see
Chapter 6.1.
13. CLEANING FURNITURE AND DELICATE
SUCTION ONLY FUNCTION
For suction only, connect the 2-in-1 suction lance to the handle
in position 1 (with bristles) (23), thereby making it possible to
remove the dust from the surfaces.
Make sure that Chapter 1 has been carried out and begin the
cleaning operations.
It is possible to adjust the suction power by moving the cursor
on the handle.
For the MCV85 model, the different coloured brushes allow for
a different colour for each surface or environment.
Ensure that the rubber frame is inside the accessory.
WARNING: Before cleaning leather or fabrics with steam,
consult the manufacturer’s instructions and always carry out a
test on a hidden part or on a sample of the material. Allow the
steamed part to dry to make sure that no changes in colour or
deformations have occurred.
Ensure that the rubber frame is inside the accessory.
WARNING: Before cleaning leather or fabrics with steam,
consult the manufacturer’s instructions and always carry out a
test on a hidden part or on a sample of the material. Allow the
steamed part to dry to make sure that no changes in colour or
deformations have occurred.
UNICO MCV80-MCV85 - M0S11431 - 1Q09:UNICO 30/08/2016 16.17 Pagina 36