
STORING
STORING
3-21
3-21
BEFORE STORING
BEFORE STORING
WARNING
WARNING
If any time your lift truck is found to be
If any time your lift truck is found to be
in need of repair, defective or unsafe,
in need of repair, defective or unsafe,
the condition should be reported to the
the condition should be reported to the
supervisor, and the truck should be taken out
supervisor, and the truck should be taken out
of service until it has been restored to safe
of service until it has been restored to safe
operating condition.
operating condition.
Before storing the lift truck, clean it thoroughly and
Before storing the lift truck, clean it thoroughly and
perform inspection using the following procedure:
perform inspection using the following procedure:
•
•
Wipe away grease,
Wipe away grease,
oil, etc., adhering
oil, etc., adhering
to the body
to the body
of the truck with shop
of the truck with shop
rag. Use water, if needed.
rag. Use water, if needed.
•
•
While washing the truck, check the general
While washing the truck, check the general
condition of the truck. Especially check the truck
condition of the truck. Especially check the truck
body for dents or cracks, the tires for wear or
body for dents or cracks, the tires for wear or
nails or stones in the tread.
nails or stones in the tread.
•
•
Check for
Check for
leakage of
leakage of
hydraulic oil.
hydraulic oil.
•
•
Apply
Apply
grease,
grease,
where
where
needed.
needed.
•
•
Check for looseness of the
Check for looseness of the
cylinder piston rod
cylinder piston rod
joints.
joints.
•
•
Check the mast
Check the mast
rollers to see
rollers to see
that they rotate
that they rotate
smoothly.
smoothly.
•
•
Lift the forks up to the top position and l
Lift the forks up to the top position and l
ower to
ower to
the lower limit. Repeat this procedure to prime oil
the lower limit. Repeat this procedure to prime oil
into the lift cylinders.
into the lift cylinders.
DAILY STORAGE
DAILY STORAGE
•
•
Park the truck
Park the truck
at a
at a
specified parking place and
specified parking place and
block the wheels. Charge the battery.
block the wheels. Charge the battery.
•
•
Turn the key
Turn the key
switch to "OFF" and slow
switch to "OFF" and slow
ly operate
ly operate
each load handling control lever 2 to 3 times to
each load handling control lever 2 to 3 times to
let out the remaining pressure in the cylinders
let out the remaining pressure in the cylinders
and hoses.
and hoses.
•
•
Remove the
Remove the
starter key
starter key
and keep it
and keep it
sure.
sure.
LONG-TERM STORAGE
LONG-TERM STORAGE
Perform the following checks in addition to “BEFORE
Perform the following checks in addition to “BEFORE
STORING” and
STORING” and
“DAIL
“DAIL
Y STORAGE” operations.
Y STORAGE” operations.
•
•
T
T
aking the rainy season into consideration, park
aking the rainy season into consideration, park
the truck at a higher and hard ground.
the truck at a higher and hard ground.
•
•
Dismount the
Dismount the
battery from
battery from
the truck.
the truck.
If the
If the
truck is
truck is
out of
out of
service for
service for
more than
more than
two
two
weeks, give an equalizing charge to recharge the
weeks, give an equalizing charge to recharge the
battery fully. Disconnect the battery connectors.
battery fully. Disconnect the battery connectors.
•
•
Even though the truck is
Even though the truck is
parked indoors, if the
parked indoors, if the
place is hot or humid, the battery should be
place is hot or humid, the battery should be
kept in a dry, cool place, and give the battery an
kept in a dry, cool place, and give the battery an
auxiliary charge once a month.
auxiliary charge once a month.
•
•
Apply anti-ru
Apply anti-ru
st to
st to
the exposed parts such as
the exposed parts such as
cylinder rods and shafts that tend to rust.
cylinder rods and shafts that tend to rust.
•
•
Cover components which may be
Cover components which may be
caught with
caught with
humidity
humidity
, such as
, such as
the air breather
the air breather
and air cleaner.
and air cleaner.
•
•
Put the truck
Put the truck
in the operating
in the operating
state once a
state once a
week
week
and turn the key switch on. Warm it up sufciently
and turn the key switch on. Warm it up sufciently
before moving the truck a little back and forth.
before moving the truck a little back and forth.
•
•
Avoid parking on a soft ground such as an
Avoid parking on a soft ground such as an
asphalt ground
asphalt ground
in summer.
in summer.
OPERATING AFTER LONG-TERM
OPERATING AFTER LONG-TERM
STORAGE
STORAGE
•
•
Remove covers
Remove covers
used to seal
used to seal
off moisture.
off moisture.
•
•
Remove antirust
Remove antirust
from the
from the
exposed parts.
exposed parts.
•
•
Drain gear oil from
Drain gear oil from
the drive unit. Wash
the drive unit. Wash
inside of
inside of
the drive unit and pour new gear oil into the drive
the drive unit and pour new gear oil into the drive
unit.
unit.
•
•
Drain foreign m
Drain foreign m
atter and water
atter and water
from the hydraulic
from the hydraulic
oil tank.
oil tank.
•
•
Mount a fully-charged battery on
Mount a fully-charged battery on
the truck and
the truck and
connect the cables.
connect the cables.
•
•
Perform
Perform
preoperational checks
preoperational checks
carefully
carefully
.
.
https://www.forkliftpdfmanuals.com/
Содержание FRSB14-8
