UniCarriers FRSB14-8, Руководство по эксплуатации и техническому обслуживанию

Страница: 79 / 136

PROPER OPERATION PROPER OPERATION
3-7 3-7
STOPPING AND PARKING STOPPING AND PARKING
1) 1) Let up on the accelerator pedal to slow down. Let up on the accelerator pedal to slow down.
2) 2) Depress the brake pedal fully to stop the Depress the brake pedal fully to stop the truck. truck.
When you park the truck, stop it in an out-of-trafc When you park the truck, stop it in an out-of-trafc
area and follow this procedure: area and follow this procedure:
1) 1) Retract the mast fully using the r Retract the mast fully using the r each lever. each lever.
2) 2) Tilt the forks fully forward using the tilt lever Tilt the forks fully forward using the tilt lever . .
3) 3) Lower the forks to make them Lower the forks to make them contact the ground contact the ground
or oor surface, using the lift lever. or oor surface, using the lift lever.
4) Turn the key switch "OFF", remove the key and 4) Turn the key switch "OFF", remove the key and
keep it safe. keep it safe.
5) Unfasten the seat belt and carefully get off the 5) Unfasten the seat belt and carefully get off the
truck. truck.
WARNING WARNING
• •
Park the Park the truck on truck on a level gro a level gro und, preferably und, preferably
in a wide area. in a wide area.
If If parking parking the the truck truck without without load load on on a a slope slope
is unavoidable, position the load handling is unavoidable, position the load handling
means down-hill and block the wheels to means down-hill and block the wheels to
prevent accidental roll. prevent accidental roll.
• •
Park the truck in Park the truck in a designated area or out a designated area or out - -
of-trafc area. If necessary, put signposts of-trafc area. If necessary, put signposts
or signal lights around the truck. or signal lights around the truck.
• •
Park the truck o Park the truck o n a hard grou n a hard grou nd. A nd. A void soft void soft
ground, deep mud or slippery surfaces. ground, deep mud or slippery surfaces.
• •
If you cann If you cann ot lower t ot lower t he forks on he forks on the ground the ground
due to a broken load handling system, put due to a broken load handling system, put
a caution cloth to the fork end and park in a caution cloth to the fork end and park in
an out-of-trafc area. an out-of-trafc area.
• •
Pay attention to the ground condition Pay attention to the ground condition
because it might be because it might be slippery. slippery.
• •
Dismount from Dismount from the truck aft the truck aft er making sure er making sure
it has come to a complete stop. Do not it has come to a complete stop. Do not
dismount from the truck in dismount from the truck in motion. motion.
• •
Never jum Never jum p of p of f t f t he tru he tru ck. ck.
• •
Check for traffic in Check for traffic in both directions. Step both directions. Step
down from the truck by facing it and using down from the truck by facing it and using
the safety step and assist grips. the safety step and assist grips.
GROUND CONDITION GROUND CONDITION
WARNING WARNING
• •
Use due cautio Use due cautio n when tr n when tr aveling on a aveling on a rough rough
surface. surface.
• •
When crossing a railroad, be sure to When crossing a railroad, be sure to
stop and ensure the safety, and cross the stop and ensure the safety, and cross the
railroad track at an angle. railroad track at an angle.
• •
Go around obstacles such as Go around obstacles such as rocks and rocks and
stumps stumps , , or or pot pot holes holes . . If If unavo unavo idabl idabl e, e,
r e d u c e t h e s p e e d a n d g o o v e r t h e m r e d u c e t h e s p e e d a n d g o o v e r t h e m
slowly and carefully. Use caution not to slowly and carefully. Use caution not to
damage the bottom of the truck. Cross a damage the bottom of the truck. Cross a
small bump diagonally if the aisle width is small bump diagonally if the aisle width is
enough to do so. enough to do so.
Lift truck performance depends upon the ground Lift truck performance depends upon the ground
condition or oor condition and travel speed should condition or oor condition and travel speed should
be adjusted be adjusted properly properly . .
https://www.forkliftpdfmanuals.com/