UniCarriers FRSB14-8 Скачать руководство пользователя страница 80

Страница: 80 / 136

LOAD HANDLING

3-8

PICK-UP

1) The fork spread should be as wide as possible

to maintain the balance of the load.

2) Place the truck right in front of the load to be

handled.

The pallet should be positioned parall

el with both

forks.

Insert the forks as far as

possible into the pallet.

Raise the load 5 to 10 cm off the upper surface of

the outriggers. To raise the load from the ground:

First

lift

the forks

off

the ground

oor surface, and make sure the load is properly

positioned across both forks.

6) If you find the load on the forks is off center,

raise the load to a height of 5 to 10 cm above

the outriggers and side-shift the forks properly

to align the load’s center of gravity with the

centerline of the truck.

WARNING

When handling loads with the side-shifter,

follow these precautions; otherwise there is

a danger of tipping the truck over to the side

because of losing lateral balance.

•

Do not t

ravel with an off-

center load on t

forks. Never lift an uneven load.

•

Do not o

perate the side-shifter

while lifting

a load.

•

Do not

operate the side-shifte

r with

the

forks raised quite high (150 cm or higher),

except when the load can be stabilized, as

it is over a shelf.

•

Do not operate the side-shifter while

traveling. Do not jerk

the side-shifter.

CAUTION

sid

e-s

hif

tin

ope

rat

ion

sho

uld

per

for

med

with the forks raised 5 to 10 cm above the top

surface of the outriggers.

Do not try to side-shift the load with the bottoms of

the forks in contact with the ground or oor surface;

otherwise the side-shifter might be

damaged.

7) Tilt back the forks fully and retract the mast

completely

. Start

traveling.

8) When handling a bulky load that restricts your

vision, drive the truck forward.

STACKING

WARNING

•

Never tilt the mast

forward with the

load

raised except when the forks are over the

rack or a stack.

•

Do not

leave the truck

with the load

raised.

When

approaching

the

deposit

area,

slow

down

your truck.

Stop the

truck before

the area

where y

our load

is to be deposited.

Conrm

the

safety

the

deposit

position.

Tilt

the forks

forward until

they are

horizontal. If

the load is not correctly positioned for stacking,

carefully operate the side-shift lever to position

the load correctly. Raise the load until the

bottom of the load is a little higher than the

position where you want to place it.

Move forward

slowly to

place the

truck just

front of the correct position, and stop the truck.

Using the

reach lever,

advance the mast

place the load over the correct position.

Make sure

the load

is j

ust above

the right

place.

Slowly lower the load into position. Make sure

the load is securely placed or stacked.

If the pallet or

load is not

placed prope

rly,

use the following procedure:

Pull about

1/4 of

the forks

off

the load

retracting the forks and raise the forks 5 to

cm.

Advan

the forks

the correct

deposit position and slowly lower the load

into position.

Fully retract

the mast

using caution

not to

hit

the pallet or load with forks. Make sure there

is no one or obstacle in front of the truck and

move forward.

After making

sure the

fork tips

leave the

pallet

or load, lower the forks to the basic traveling

position (30 cm off the ground or oor surface).

10) Tilt back the forks.

https://www.forkliftpdfmanuals.com/

Содержание FRSB14-8









































































































































Результаты поиска

Содержание FRSB14-8

Отзывы:

Бренды по названию

Популярные бренды

UniCarriers FRSB14-8, Руководство по эксплуатации и техническому обслуживанию

Результаты поиска

Содержание FRSB14-8

Отзывы:

Бренды по названию

Популярные бренды