21
Kinetic Spectra, Instruction & Safety Manual
T
08 9351 7500
E
W
www.unicarehealth.com.au
Product information
Maintenance
After 2,000 hours of operation, KINETEC Spectra requires a few lubrication and maintenance
operations (lubrication of the joints, pointer stops and ball screws).
The need for maintenance is indicated by display of the message SERV. MOTOR when the system is
switched on.
Despite that warning, you can continue to use your KINETEC Spectra by pressing START, but you
should contact your nearest KINETEC technician to have the maintenance
operations conducted as soon as possible.
• A motor running time counter is available. Simultaneously press keys and , the displays shows this
counter can be resetting by pressing the key .
Troubleshooting
A spare parts list and technical catalog are available to
you on request from your KINETEC distributor.
If, after connecting the power supply cable to the power
supply and switching on KINETEC Spectra:
• The display does not indicate any information:
- Check that the electrical socket is live using
another device.
- Replace the fuse(s) (32) of the connector with
fuses of the same type and calibre:
2 fuses T 750 mA 250V (6.3 x 32) (KINETEC
order: 4610007434).
- If the display still does not indicate any information, contact your nearest KINETEC
technician.
• Your KINETEC Spectra does not work and the display indicates 50 STOP 25 115,
Press START again.
Your KINETEC Spectra still does not function: Contact your nearest KINETEC technician.
• Your KINETEC Spectra does not function and the display indicates:
ANGULAR POSI.: angle measurement function failure,
or NO MOVEMENT: no movement,
or BAD WAY: motor rotation failure,
or LOAD MAXI: abnormal consumption,
or POWER SUPPLY: power failure;
Contact your nearest KINETEC technician if the same message is displayed after having switched the
device off, then on, and started it by pressing START.
