Unical TRISTAR 3G страница 14 Скачать руководство пользователя

Страница: 14 / 48

Technical features and dimensions

INSTALLATION

INSTRUCTIONS

3.1 - GENERAL WARNINGS

ATTENTION!

This boiler is intended solely for the use for

which it was expressly designed. Any other

use is to be considered improper and there-

fore dangerous.

This boiler heats water at a temperature lower

than the atmospheric pressure boiling tem-

perature.

ATTENTION!

The appliances are designed to be installed

inside suitable rooms or technical spaces

only. The appliances cannot be installed or

operate outdoors. Outdoor installation can

cause malfunctioning and be dangerous.

Choose specifically designed appliances for

outdoor installation.

Before connecting the boiler, have professio-

nally qualified personnel:

a) Thoroughly wash all the piping of the sy-

stem to remove any residue or impurities whi-

ch could jeopardise proper operation of the

boiler;

b) Check that boiler is set up to operate with

the available type of fuel.

This can be seen written on the package and

on the technical feature plate;

c) Check that the chimney/flue has an appro-

priate draught, without any bottlenecks, and

that no exhausts from other appliances are

inserted, unless the flue has been implemen-

ted to accommodate several utilities according

to specific standards and prescriptions in for-

ce. Only after this check can the fitting betwe-

en the boiler and chimney/flue be mounted;

ATTENTION!

In rooms with the presence of aggressive

vapours or dust, the appliance must operate

independently from the air inside the instal-

lation room!

ATTENTION!

The appliance must be installed by a quali-

fied technician with the technical-professio-

nal requirements according to law 46/90

which, under his own responsibility, guaran-

tees compliance with standards according

to good practice rules.

The boiler must be connected to a central hea-

ting system and/or domestic hot water supply

network compatible with its efficiency and ou-

tput.

Содержание TRISTAR 3G

















































Результаты поиска

Содержание TRISTAR 3G

Отзывы:

Похожие инструкции для TRISTAR 3G

Бренды по названию

Популярные бренды

Unical TRISTAR 3G, Инструкция по установке и обслуживанию

Результаты поиска

Содержание TRISTAR 3G

Отзывы:

Похожие инструкции для TRISTAR 3G

Бренды по названию

Популярные бренды