Unical TRISTAR 3G страница 3 Скачать руководство пользователя

Страница: 3 / 48

General Information

1.1 - SYMBOLS USED IN THE MANUAL

Pay special attention when reading this manual to the parts marked by the symbols:

NOTE !

Suggestions for the user

ATTENTION !

Possibly hazardous situation for the

product and the environment

DANGER !

Serious risks personal

safety and life

1.2 - APPROPRIATE USE OF APPLIANCE

The TRISTAR 3G appliance has been built according to the current level of engineering and acknowledged

technical safety rules.

Nonetheless, if improperly used, dangers could arise for the safety and the very life of the user and other

persons or damage to the equipment or other objects.

The appliance is intended to operate in hot air circulation heating systems.

Any other use must be considered improper.

UNICAL shall not be held liable for any damage resulting from improper use; in this case the user is fully

responsible for the risk.

Use according to the intended purposes also includes careful compliance with the instructions in this

manual.

1.3 - WATER TREATMENT (see specific booklet)

• The hardness of the feed water conditions the frequency at which the domestic hot water exchanger must be

cleaned.

• If the water has a hardness greater than 15 °f, we recommend using water softeners, chosen according to the

characteristics of the water.

• We recommend checking and cleaning the domestic hot water exchanger at the end of the first year of use

and every two years thereafter; on this occasion, also check the state of wear of the anode.

1.4 -INFORMATION TO PROVIDE TO THE SYSTEM MANAGER

• The user must be instructed concerning the use and operation of his heating system, in particular:

• Deliver these instructions to the user, as well as other documents concerning the appliance included in the

envelope inside the packaging.

The user must keep this documentation for future consultation

• Inform the user about the importance of the air vents and the flue gas exhaust system, highlighting their

essential features and the absolute prohibition of modifying them.

• Inform the user about how to control the system's water pressure as well as operations to restore it.

• Inform the user about correct temperature control, control units/thermostats and radiators for saving energy.

• Remind that regularly system maintenance must be performed at least once a year and that combustion

analysis must be performed as scheduled by applicable rules.

• Should the appliance be sold or transferred to a new owner or if you move and leave the appliance, always make

sure that the instruction booklet accompanies it so the new owner and/or installer can access it.

GENERAL INFORMATION

Attention: this manual contains instructions for the exclusive use of the professionally qualified installer and/

or maintenance technician in compliance with current legislation.

The user is NOT qualified to intervene on the boiler.

The manufacturer will not be held liable in case of damage to persons, animals or objects resulting from

failure to comply with the instructions contained in the manuals supplied with the boiler.

Содержание TRISTAR 3G

















































Результаты поиска

Содержание TRISTAR 3G

Отзывы:

Похожие инструкции для TRISTAR 3G

Бренды по названию

Популярные бренды

Unical TRISTAR 3G, Инструкция по установке и обслуживанию

Результаты поиска

Содержание TRISTAR 3G

Отзывы:

Похожие инструкции для TRISTAR 3G

Бренды по названию

Популярные бренды