Unical S 24, Руководство пользователя

Страница: 38 / 52

38
PARAMETER par 4.2
CODE GAS NAT. PROPANE
778
0 1
DANGER!
The conversion for the operation of
the boiler with a type of gas other
than that specifically required in the
order, must be performed by pro-
fessionally qualified personnel, in
compliance with the standards and
regulations in force.
The manufacturer cannot be held
liable for any damage resulting from
a conversion operation that is incor-
rect or not performed in compliance
with the laws in force and/or with the
instructions given.
ATTENTION!
After performing the conversion for
the operation of the boiler with a type
of gas (e.g. propane gas) other than
that specifically requested when or
-
dering, the appliance will only work
with this new type of gas.
ATTENTION!
Indications for propane gas-fired
appliances
Make sure that the gas tank has been
deaerated before installing the appli-
ance.
For state-of-the-art deaeration of the
tank, contact the LPG supplier or a
person qualified in compliance with
law.
If the tank has not been profession
-
ally deaerated, ignition problems
could arise.
In that case, contact the supplier of
the LPG tank.
4.3 - ADAPTATION
TO THE USE OF OTHER GAS
Gas Conversion
The boilers are produced for the type of gas specifi
-
cally requested upon ordering.
In order to change the gas one must change
the Factory parameter:
Once the 778 parameter has been
edited one must perform the GAC
automatic calibration (Gas Adaptive
Calibration) Chapter 4.3.1
EXAMPLE OF COMPILATION
-
when the conversion is complete, fill in the
information required on the label supplied in
the documentation envelope and apply it next
to the technical data label of the boiler.
NOTE!
For more information
See Technical Info
from site indicated at pag. 2