IBC SFC-125, Заметки

Страница: 1 / 6

120-244E2
| 1
Note
If converting from Propane to Natural Gas, order the Natural Gas Conversion Parts Kit (IBC Part # P-
807) from your authorized IBC Distributor.
Use the Propane Gas conversion parts kit if the fuel source at the site uses Propane and the appliance has been
set up to operate with Natural Gas. Check the rating plate on the boiler to see which fuel source the particular
appliance has been set up with.
Using this conversion kit, a qualified technician will need to:
1. Perform a fuel conversion.
2. Perform a combustion test.
3. Fill in the information required on the fuel conversion labels, and affix them to the boiler after the
conversion is completed.
Warning
This conversion kit shall be installed by a qualified service agency in accordance with the
manufacturer’s instructions and all applicable codes and requirements of the authority having
jurisdiction. If the information in these instructions is not followed exactly, a fire, an explosion or
production of carbon monoxide may result causing property damage, personal injury or loss of life.
The qualified service agency is responsible for the proper installation of this kit. The installation is not
proper and complete until the operation of the converted appliance is checked as specified in the
manufacturer’s instructions supplied with the kit.
The boiler will automatically de-rate the maximum input at a rate of approximately 2% per 1,000’ above 4,500’.
The gas valve's zero-governor will ensure that the gas-air mixture is not affected at altitude.
Included with the Conversion Kit:
Part # Description Quantity
180-229
LP orifice # 370 1
150-175 Orifice O-ring 19 x 2 1
080-305 Rating plate overlay 1
080-107 Gas valve conversion label 1
080-244 Installer Identification label 1
SFC 125 / SFB 125 - Fuel Conversion to
Propane - P-806