Unical ELLPREX Series, Инструкция по установке, использованию и обслуживанию

Страница: 3 / 40

GAS SAFETY (INSTALLATION
AND USE) REGULATIONS,
1994
It is law that
all
gas appliances are installed
and serviced by a CORGI registered installer in
accordance with the above regulations.
Failure to install appliances correctly could lead
to prosecution.
It is in your own interest, and that of safety, to
ensure the law is complied with.
The installation of the boiler MUST also be in
accordance with the latest I.E.E. Wiring
Regulations, local building regulations, byelaws
of the local water authority, the building
regulations and the Building Standards
(Scotland) and any relevant requirements of
the local authority.
Detailed recommendations are contained in the
following British Standard Codes of Practice:
BS 6891
Low pressure installation pipes.
BS 5449 Forced circulation hot water
systems.
BS 5546 Installation of gas hot water
supplies for domestic purposes
(2nd Family Gases).
BS 6644 Ventilation (for gas appliances of
rated input exceeding 60 kW).
HEALTH & SAFETY
DOCUMENT No. 635
The Electricity at Work Regulations, 1989.
The manufacturer's notes must NOT be taken,
in any way, as overriding statutory obligations.
IMPORTANT
. These appliances are CE
certificated for safety and performance.
It is, therefore, important that no external
control devices, e.g. flue dampers, economisers
etc., are directly connected to these appliances
unless covered by these Installation and
Servicing Instructions or as otherwise
recommended by
Unical
in writing.
If in doubt please inquire.
Any direct connection of a control device not
approved by
Unical
could invalidate the
certification and the normal appliance warranty.
Notes.
To obtain the gas consumption:
a.
For l/s divide the gross heat input (kW) by
C.V. of the gas (MJ/m³).
b.
For ft³/h divide the gross heat input (Btu/h)
by C.V. of the gas (Btu/ft³).