Unic Mira, Техническая заметка

Страница: 14 / 32

14
Air/steam
adjust
Steam Air
Outlet

Components
Outlet cleaning:
- Brake down the device and clean it once per day minimum.
- After each use, rinse the outlet using the Steam.

Use
Steam and hot water keys:
- An impulse on the key activates the corresponding flow delivery.
The led lights in green for an hot water dose and in red for a steam dose.
- To stop before the end of the delivery, press again the same key
Note: a safety stops the flow after 105 seconds for the water and after 180 seconds for the steam.
SteamAir key:
- Automatic mode: (To reach the programmed T°)
One impulse on the key makes the SteamAir flow until the liquid reaches the preset temperature
(see § programming)
You can stop it manually by pushing again on the key.
- Manual mode: (Over the programmed T°)
If after the stop in automatic mode (temperature reached) you wish to continue the heating, you
have to press again the key.
Then you go into manual mode and the outlet is again activated.
To stop you will have to push again on the same key.
If you don’t do it, it will be stopped automatically by one of the two safeties: after 180 seconds or
when the liquid temperature reaches 96°
Note: when a safety is switched on, the led blinks.
o oo ooo
Steam
only
Level 1
Very fine foam
level 2
Fine foam
level 3
Medium foam