UNIA HERMES 3.0, Руководство пользователя

Страница: 18 / 23

18
14. When changing the knives, pay attention as not to change the right knives with the left ones and
vice versa. The knife blade should be directed in the direction of rotation. After installing the knives,
check manually that the rotors with knives rotate without jamming
15. If the bolts in the PTO drive shast (if the shaft of this type is mounted) get sheared, protecting the
machine from damage, only use the bolts recommended by the factory, i.e. M8 x 60 - 8,8 B bolts,
acc. to PN-85 / M-82101, for the replacement. The strength designation of the screw 8.8 is
embossed on the screw head.
16. Do not adjust the bolts of the overload clutch in the PTO drive shaft (if the shaft of this type
is mounted)
When starting work, activate the PTO rotation in th e transport position and lower the unit
smoothly after reaching 540 RPM or 1000 RPM (HERMES 4.0 option), while driving forward.
Caution !
It is forbidden to start working with the machine knife buried in the ground.
The macine must not be driven backwards.
9. Delivery and Shipment
1. The shipment conditions are set by the manufacturer, if there are no other arrangements with
the recipient
2. The buyer agrees the date of receipt of the machine with the manufacturer
3. The seller/importer is responsible for the packaging of the machine.
4. Loading the machine belongs to the manufacturer. During transport, the carrier is
responsible for the machine
SHIPMENT
Caution !
ALWAYS SHIP THE MACHINE IN THE TRANSPORT POSITION – MOUNTED AND RAISED ON THE
TRACTOR HITCH ; IT IS FORBIDDEN TO STAY WITHIN THE TRACTOR + THE MACHINE MANOEUVRE
RANGE
When moving the unit, please observe the following rules:
1. When driving on a highway, always obey the traffic rules and prepare the unit in the manner
required by the regulations (i.e. appropriate lights, direction indicators, warning triangle, etc.),
according to par. 2.2 above.
2. All devices that set the machine into motion, such as chains, rollers, axles, etc., should be
connected in such a way that accidental movements while driving do not affect the
machine’s ability to operate or transport in the future.
3. Driving and gear shifting can negatively affect the mechanism of lowering and lifting the tractor
and the machine mounted on it. That’s why you should always leave enough room for
manoeuvres and control your gears.
4. The machine may not carry passengers or any materials.
5. If you are transporting the machine, for example, on a trailer or platform, it must be tied tightly
with chains, ropes or belts. Use only certified ropes, belts or chains. Always check their condition
before use.
6. Switch the machine to the transport position even for short distances. In the case of work with
a coupling (lift) mounted, without a seeder or with a seeder raised on it, the coupling (lift) must
be secured with bolts against self-lowering (see Fig.11-1.)