UNIA HERMES 3.0, Руководство пользователя

Страница: 7 / 23

7
Lighting devices should be mounted so that both the rear unit lamps and the surface of the
plate, painted in white and red stripes, were directed to the back of the tractor/machine unit,
and the white marking lamps and the white and red surface of the plat e – to the front of the
unit. It is necessary to secure the devices in the holders with a standard linchpins, used in
agricultural tractors.
Double - sided panels are allowed, fixed in one holder, in accordance with the above rules .
Remember to connect portable lighting devices to the tractor’s electrical installation .
Warning!
THE USE OF PORTABLE LIGHTING DEVICES WITHOUT WARNING PLATES IS
PROHIBITED
Units with working widths up to 3 m can move on highways under the
condition of installation portable warning plates on the machine, with
oblique white and red stripes, equipped with white front and red rear side
marking lamps (in accordance with PN -R- 41001 and PN -R- 41002, to be
bought in a machine depot .
Fig. 2-1. Diagram of fixing portable lighting devices
(1-front panel; 2- triangle distinguishing slow moving vehicles; 3-cultivator or seeding
combination unit; 4- rear panel)
Caution!
Use typical protection hardware, such as pins and linchpins to secure the
suspension journals and all bolts included in the agricultural unit .
Use of substitute securing measures, such as: screws, rods or wires is
forbidden, since they can become sheared or fall out during operation or
transport and thus, they may cause damage to the tractor and the
machine, and to jeopardize the safety of other road users .
DRIVING ON HIGHWAYS WITHOUT WARNING SIGNS AND LIGHTING REQUIRED BY
TRAFFIC REGULATIONS M A Y C A U S E A C C I D E N T S !