UTL8500 Series User Manual
47
Copy and apply:
The user can copy and apply the list test files of the two storage spaces,
and at the same time, the files can also be deleted.
File Function:
Name
Description
U Disk/Flash
Select U Disk or Flash as the Currently Displayed
Storage Space
Delete
Delete the Currently Highlighted File
Copy
Copy the Selected File to Another Storage Space
Apply
Apply the Selected Test File (Apply the List Test File)
Print Sc
Save the Current Screen Image to U disk
Note: On File page, only the list test files can be copied and applied mutually, and the
screenshots in the U disk cannot do that.
5.4 Instrument Info
Press the [System] key to enter SYSTEM CONFIG interface, and select [Info] function key
at the bottom of the screen to enter the <Instrument Info> page. The Instrument Info page
can view the basic information of the instrument, including the model, version number and
serial number of the electronic load.
5.5 Local/Remote
The electronic load has two operating modes: local and remote.
Local: use the buttons on the electronic load to operate.
Remote: The electronic load is connected to the PC through RS232 and other
communication cables, and commands are sent on the PC to perform related operations
on the load through the upper computer software.
When the electronic load is in Remote mode, except for the function key [Local], other keys
on the panel will not work. When you do not need to use the Remote function, you can
switch to Local mode by pressing the [Local] button.
The status bar at the top of the screen will display Local/Remote, indicating the current
control status of the load. The user can judge the control status of the load according to
the display on the screen.
Operation Steps:
1. Press the [System] key to enter SYSTEM CONFIG interface, and select [Local] at the
bottom of the screen to switch the current Local mode to Remote mode. The "Remote"
icon will be displayed at the top of the screen, indicating that the electronic load is in
