UNI-T UTL8200+ Series, Руководство пользователя

Страница: 27 / 33

User’s Manual Series DC Electronic Load
Instruments.uni-trend.com
27 / 33
Set
【
Language
】
Figure 8-2 Language Setting
Setup Steps
(1) Use rotary knob or direction key to move the cursor to
【
LANGUAGE
】
, as shown in Figure 8-2.
(2) Press Enter key to complete the setting.
(3) Press ESC key to go back to the last level, press ESC key again to enter the main operating
interface.
Other parameter setting as the same, system configuration as shown in Figure 8-3
Figure 8-3 System Configuration
Set
【
Baud Rate
】
Figure 8-4 Baud Rate Setting
Setup Steps
(1) Use rotary knob or direction key to move the cursor to
【
baud rate
】
, as shown in Figure 8-3.
(2) Use rotary knob or direction key to switch baud rate.
(3) Press Enter key to confirm and set the selected the baud rate.
(3) Press ESC key to go back to the last level, press ESC key again to enter the main operating
interface.
8.2 Parameter Setting
In parameter setting is used to set operating parameter and protective parameter, the specified
range is related with the model.