UTG1000A Series Function Generator User Manual
15
Chapter 3 Quick Start
3.1 General Inspection
It is recommended to follow the steps below to check the instrument before using this device for the
first time.
3.1.1 Check for Damages Caused by Transport
If the packaging carton or the foam plastic cushions are severely damaged, please contact the UNI-T
distributor of this product immediately.
If the instrument is damaged by transport, please keep the package and contact the transport
department and the UNI-T distributor, the distributor will arrange for repairment or replacement.
3.1.2 Check Accessories
UTG1000 accessories are: Power cord, USB data cable, BNC cable (1 meter), and user CD.
If any of the accessories are missing or damaged, please contact UNI-T or local distributors of this
product.
3.1.3 Machine Inspection
If the instrument appears to be damaged, not working properly, or has failed the functionality test,
please contact UNI-T or local distributors of this product.
3.2 Handle Adjustment
UTG1000 series handle can be adjusted freely. If the handle position needs to be changed, please hold
the handle on both sides and pull out, then rotate the handle to the desired position, as shown in figure
3-1:
Figure 3-1
