UNI-T UTG1000A Series Скачать руководство пользователя страница 5 | Manualshive

Страница: 5 / 96

background image

UTG1000A Series Function Generator User Manual

4

d) Any maintenance on altered or integrated products (if such alteration or integration leads to an
increase in time or difficulty of product maintenance).

This warranty written by UNI-T for this product, and it is used to substitute any other express or implied
warranties. UNI-T and its distributors do not offer any implied warranties for merchatability or
applicability purposes.
For violation of this guarantee, UNI-T is responsible for the repair or replacement of defective products
is the only remedy available to customers. Regardless of whether UNI-T and its distributors are
informed that any indirect, special, incidental, or consequential damage may occur, the UNI-T and its
distributors shall not be responsible for any of the damages.

General Safety Overview

This instrument strictly complies with the safety requirements for electronic measuring instrument
GB4793 and IEC 61010-1 safety standard during design and manufacturing. Please understand the
following safety preventative measures, to avoid personal injury, and to prevent damage to the product
or any connected products. To avoid possible dangers, be sure to use this product in accordance with
the regulations.

Only trained personnels can perform the maintenance program.

Avoid fire and personal injury.

Use the correct power line:

Only use the dedicated UNI-T power supply appointed to the local region

or country for this product.

Correct Plug:

Don't plug when the probe or test wire is connected to the voltage source.

Ground the product:

This product is grounded through the power supply ground wire. To avoid electric

shock, grounding conductors must be connected to the ground. Please be sure that the product is
properly grounded before connecting to the input or output of the product.

Correct connection of oscilloscope probe

: Ensure that the probe ground and ground potential are

correctly connected. Do not connect ground wire to high voltage.

Check all terminal ratings

: To avoid fire and the large current charge, please check all the ratings and

the marks on the product. Please also refer to the product manual for details on the ratings before
connecting to the product.

Do not open the case cover or front panel during operation

Only use fuses with ratings listed in the technical index

Avoid circuit exposure

: Do not touch exposed connectors and components after power is connected.

«
...
3
4
5
6
7
...
»

Содержание UTG1000A Series

































































































Отзывы:

Нет отзывов

Похожие инструкции для UTG1000A Series

Бренд: Camoga Страницы: 43

Бренд: Monoprice Страницы: 2

MOAB30-09HFN8-QRD0GW

Бренд: Midea Страницы: 172

Бренд: Raritan Страницы: 20

Бренд: MULTIQUIP Страницы: 62

Q.HOME+ ESS HYB-G2

Бренд: Q CELLS Страницы: 60

Бренд: Riello Страницы: 16

4i4o + Merge 2i4o

Бренд: Prodipe Страницы: 16

ULTRA-SILENT DCA-125USJ

Бренд: MULTIQUIP Страницы: 84

Бренд: Wacker Neuson Страницы: 36

Бренд: S&P Страницы: 56

Бренд: Teac Страницы: 16

Бренд: LG Chem Страницы: 53

Бренд: Aus Electronics Direct Страницы: 7

Бренд: Owon Страницы: 52

MUSIC STREAMER COMBO

Бренд: Matrix Audio Страницы: 24

Бренд: Matrix Страницы: 19

Бренд: IOTA Страницы: 4

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды