Page 19 of 27
UT
D
4000 Digital storage oscilloscope communication control software
Operating
Manual and Installation Guide
During “data transmission”, this status bar indicates the current control status of the oscilloscope.
This bar changes with the actual control status of the oscilloscope but you cannot control the
current status of the oscilloscope with this bar.
CH1 :
Coupling method (DC, AC, GND); Bandwidth suppression (On, Off); Filter type (low-pass,
high-pass, band-pass, band-stop); Digital filter (when the indicator light comes on the function is
ON, when the indicator light goes off the function is OFF); Reverse (when the indicator comes on
the function is ON, when the indicator light goes off the function is OFF); Probe (1X, 10X, 100X,
1000X).
CH2 :
Coupling method (DC, AC, GND); Bandwidth suppression (On, Off); Filter type (low-pass,
high-pass, band-pass, band-stop); Digital filter (when the indicator light comes on the function is
ON, when the indicator light goes off the function is OFF); Reverse (when the indicator light
comes on the function is ON, when the indicator light goes off the function is OFF); Probe (1X,
10X, 100X, 1000X).
Sampling method :
Random; Real-time; ROLL
Interpolation :
Yes; No
Current activated channel :
MATH; CH1; CH2
Channel selection :
CH1; CH2; MATH
Bias adjustment :
Vertical; Horizontal
Range adjustment :
Voltage range; Time base range
Real-time Control :
Equipment selection (USB); ON/OFF (when the indicator light comes on the
function is ON, when the indicator light goes off the function is OFF); Data transmission (when the
indicator light comes on the function is ON, when the indicator light goes off the function is OFF);
Transmission interface (when the indicator light comes on the function is ON, when the indicator
light goes off the function is OFF).
Reverse mathematics function :
Indicator on means reverse mathematics function is in process.
Indicator off means reverse mathematics function is not in process.
Mathematics function :
Select mathematics functions with the function menu in the menu bar.
Auto Refresh :
Set up the refresh time interval with the waveform refresh menu in the menu bar.
Refresh time :
Set up refresh time while performing auto refresh.
Uni-Trend Technology (Chengdu) Ltd
