Page 14 of 27
UT
D
4000 Digital storage oscilloscope communication control software
Operating
Manual and Installation Guide
Playback :
After stopping “data transmission”, you can play back the waveform recorded and
saved on the computer hard disk or other mobile storage media. Simply select
“Document”
→
“Playback”. You can play back a waveform in dynamic or static mode.
Dynamic
playback :
Select “Document”
→
“Playback”
→
“Dynamic playback”. The waveform playback
loading interface in Fig 2-4 will pop up. Specify the search area to locate the storage
path of the recorded waveform, select the recorded waveform document you require,
then click the [Load] button. The recorded waveform will be played continuously on
the virtual display with the current playback progress.
Static
playback :
Select “Document”
→
“Playback”
→
“Static playback”. The waveform playback
loading interface in Fig 2-4 will pop up. Specify the search area to locate the storage
path of the recorded waveform, select the recorded waveform document you require,
then click the [Load] button. Fig 2-5 will now appear. By using the “manual playback”
button, you can play back the recorded waveform screen by screen. Alternatively, enter
the required screen number in the screen number display field and press “ENTER”.
Your specified screen will be displayed. To close the static playback function, click the
“close static playback” button.
Fig 2-4
Fig 2-5
Manual playback button
Field for entering the number of
Uni-Trend Technology (Chengdu) Ltd
