UNI-T UTD1000L Series Скачать руководство пользователя страница 64

Страница: 64 / 85

Location

----

There are 1-5 location options available, use
arrow buttons to select when the menu
displays

Save

----

To save recorded waveform to internal
memory.

Recall

----

To recall the waveform record that is saved
in internal memory

Note:

You can also save the recorded waveform to PC using the control sofeware and play it on PC.

Case 1:

To record channel waveforms and save them to the internal memory, do the following:

    1. Press RECORD button to access record menu;
    2. Press F1 to set to Record option;
    3. PressF4 to begin recording. To stop recording, press F3 button;

4. Press F1 to set to Save option;

5. Use Arrow Buttons to set the location to

;

6. Press F3 to save the recorded waveform, “Saving

…

” shows on the screen. When “Saving

…

” icon

disappears, it indicates the waveforms have already been saved into internal memory.

Note

: Model UTD1000CL can record up to 300 screens of waveforms, and it is up to 150 for Model

UTD1000DL. If following operations are performed during recording, the recording will stop.

■

Press RUNSTOP/SINGLE button;

■

PressAUTO or SHIFT+AUTO button

■

Turn Timebase range to access SCAN mode.

Case 2:

To recall recorded waveform in Case 1 from the internal memory and replay it, do the following:

    1. Press RECORD to access record menu;
    2. Press F1 to set to Save option;
    3. Press Arrow Buttons to set Location to 1;

4. Press F4 to begin recalling, “loading

…

” indicates on the screen, after the loading finishes, “Load

Success” indicates.

5. Press F1 to set to Record option;

6. Press F2 button to begin playing the recalled waveforms automatically, press F3 to stop or use Arrow

Buttons to select the waveform to be played.

Figure 6-24 Replay Waveform Record

UTD1000L User Manual 

Содержание UTD1000L Series






















































































Результаты поиска

Содержание UTD1000L Series

Отзывы:

Похожие инструкции для UTD1000L Series

Бренды по названию

Популярные бренды

UNI-T UTD1000L Series, Руководство пользователя

Результаты поиска

Содержание UTD1000L Series

Отзывы:

Похожие инструкции для UTD1000L Series

Бренды по названию

Популярные бренды