UNI-T UTD1000L Series Скачать руководство пользователя страница 15 | Manualshive

Страница: 15 / 85

background image

: To power on/off the Oscilloscope

F1

～

F4: To set up the submenus

: To toggle between Scope (DSO) and multimeter (DMM) modes.

: Press this button to access ACQUIRE (sample mode) menu if under DSO mode; press SHIFT first

and then this button to access intensity, with help of right and left arrow buttons, you can change
screen brightness. If under DMM mode, pressing this button can access voltage measurement
menu.

: Press this button to access DISPLAY (Display mode) menu if under DSO mode; or press SHIFT

first and then this button to access CONFIGURE (interface configuration) menu; pressing this
button under DMM mode to access current measurement menu.

: Press this button under DSO mode to access MEASURE(auto measurement) menu; or press

SHIFT first and then the button to access COURSOR(cursor measurement)menu; if under DMM
mode, press the button to access resistance measurement menu and measure resistance/
diode/continuity/capacitance.

: In DSO mode, press it to access CHANNEL menu for UTD1000CL; repeatedly press to toggle

between two channel menus for UTD1000DL.

: In DSO mode, press the button to access FFT menu for UTD1000CL; or press

the button and then F1 button to toggle between FFT and MATH menus for
UTD1000DL. Press SHIFT first and then the button to access STATUS display.

: In DSO mode, press to access RECORD (waveform record) menu; or press SHIFT first and then the

button to access STORAGE menu.

: Under DSO mode, press to set up SINGLE (single trigger) function; press first SHIFT and then the

button to access REF (waveform recall) menu.

: Under DSO mode, press to automatically set up the waveform; press SHIFT first and then the

button to switch on full autoset function. The Oscilloscope can automatically adjust the ranges to
obtain optimal waveform based on the input signal without any manual interference.

: Under DSO mode, press to start/stop data acquisition; if under DMM, press the button to lock

measuring readings on the screen.

: Under DSO mode, press to access TRIGGER menu; or press SHIFT first and then the button to

access UTILITY menu;

: Under DSO mode, press to access HORIZONTAL menu; or press SHIFT first and then the
button to open HELP information.

12

UTD1000L User Manual

«
...
13
14
15
16
17
...
»

Содержание UTD1000L Series






















































































Отзывы:

Нет отзывов

Похожие инструкции для UTD1000L Series

Бренд: Campden instruments Страницы: 8

Precision2 HP2 Series

Бренд: B-K lighting Страницы: 6

Бренд: Zero Hand Truck Страницы: 38

Бренд: B-K lighting Страницы: 3

Бренд: Taylor-Wharton Страницы: 25

Бренд: i-CAT Страницы: 96

Бренд: Kärcher Страницы: 88

Бренд: Ofa Bamberg Страницы: 80

Бренд: R&S Страницы: 2677

Бренд: Garden Treasures Страницы: 2

Бренд: YASKAWA Страницы: 40

RAISED GARDEN BED

Бренд: Yardfully Страницы: 2

Бренд: EFX Страницы: 2

Бренд: Martin Страницы: 202

DependaBar DB-18-PCW

Бренд: Healthcraft Страницы: 13

Бренд: Unitech Страницы: 37

AutoMate 2500 series

Бренд: Beckman Coulter Страницы: 50

Бренд: Grundig Страницы: 16

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды