User’s Manual UT5583 Insulation Resistance Tester
Instruments.uni-trend.com
18
/
47
6. <Test> Display Page
6.1 <Test> Display Page
Boot-up or press [Test] key to enter [Test] page; Test can only be started at test page.
<Test> display page is mainly used to display measured results, test state and sorting results.
5 common function can be set at this page, including
Voltage — output voltage setting
Speed — test speed setting
Range — measuring range setting
Upper limit, lower limit: it can set when comparator function is enabled, refer to Section 8 comparator
setting.
Figure 6-1<Test> Page
Charge State
Test State
Discharge State
