Model UT233: OPERATING MANUAL
27
Figure 22
The triple displays shows the second phase value
of power factor cos , AC Voltage V and AC Current
A.
Press
SELECT
again to choose the third phase
3
, see figure 23.
Figure 23
The triple displays shows the third phase value of
power factor cos , AC Voltage V and AC Current A.
5. When measuring 3 phase 3 wires:
The first phase and second phase operating
method is same as three phase 4 wires.
Jump over the third phase measurement.
6.
MAX/
and
MIN/
are not valid at this
measurement mode.
Note
When testing has been completed, disconnect the
connection between the testing leads and the circuit
under test and remove testing leads from the input
terminals.
