25
Model UT233: OPERATING MANUAL
The triple displays shows the second phase value
of reactive power Kvar, AC voltage V and AC current
A.
Press
SELECT
again to choose the third phase
3
,
see figure 20.
Figure 20
The triple displays shows the third phase value
of reactive power Kvar, AC voltage V and AC
current A.
5. When measuring 3 phase 3 wires:
The first phase and second phase operating
method is same as three phase 4 wires.
Jump over the third phase measurement.
6. The maximum measuring range is 600kW when
measuring single phase reactive power Kvar,
OL
wil
be displayed when it is over than that.
7. MAX
and
MIN
are not valid at this measurement
mode.
When testing has been completed, disconnect the
connection between the testing leads and the circuit
under test and remove testing leads from the input
terminals.
Note
Then press
SELECT
again to choose the second
phase
2
, see figure 19.
Figure 19
