background image

 

 

Preface 

Thank you for purchasing the new linear DC power supply. In order to use this product safely and 
correctly, please read this manual thoroughly, especially the 

Safety Information 

part.   

After reading this manual, it is recommended to keep the manual at an easily accessible place, 
preferably close to the device, for future reference.   

 

Limited Warranty and Liability 

Uni-Trend  guarantees  that  the  product  is  free  from  any  defect  in  material  and  workmanship 
within  3  years  from  the  purchase  date.  This  warranty  does  not  apply  to  damages  caused  by 
accident, negligence, misuse, modification, contamination or improper handling. The dealer shall 
not be entitled to give any other warranty on behalf of Uni-Trend. If you need warranty service 
within the warranty period, please contact your seller directly. 

Uni-Trend will not be responsible for any special, indirect, incidental or subsequent damage or 
loss caused by using this device.   

 

UDP3303C Linear DC Power Supply Introduction 

The  UDP3303C  DC  power  supply  is  a  cost-effective  program  control  DC  power  supply  with 
outstanding  performance,  reliable  output  and  clear  interface.  The  UDP3303C  DC  power  supply 
has three independent outputs: two of them are adjustable outputs of 30V/3A, the other one is a 
fixed selectable output of 1.8V/2.5V/3.3V/5V/3A (fine adjustable). With the constant voltage (CV) 
and  constant  current  (CC)  modes,  short  circuit  and  overvoltage  protection  features,  the 
instrument can perfectly meet various test requirements.   

 

Safety Information 

Important  safety  instructions  must  be  followed  for  operating  and  storing  the  UDP3303C.  To 
ensure your personal safety, read the following instructions carefully before operation to ensure 
that the UDP3303C is in the best working environment.   

 

 

 

 

 

 

 

Содержание UDP3303C













Отзывы: