Bi-spectrum network camera
User Manual
Configuring Thermal
Issue V1.0
（
2021-10-25
）
21
Parameter
Description
Setting
Length units
Meters and feet length units are
available.
[Setting method]
Select a value from the
drop-down list box.
[Default value]
Meters
Cavity
Temperature
The cavity temperature of
camera.
N/A
Correction
Coefficient
Correction coefficient is refer to
the deviation of measured
object temperature and
actual temperature, is offset
value.
For example:
1. The measured object
temperature is 20, and actual
temperature is 20.5, so the
correction coefficient should be
0.5.
2. The measured object
temperature is 20, and actual
temperature is 19.5, so the
correction coefficient should be
-0.5
.
NOTE
User should contact the technical
support staff of our company at this
condition to make sure to apply
[Setting method]
Enter a value manually.
[Default value]
0.00
Area ID display
mode
There two mode to display, area
ID and area name
[Setting method]
Select a value from the
drop-down list box.
[Default value]
Area ID
Area Temperature
Display Mode
The display position of
temperature information on the
live-video image.
[Setting method]
Select a value from the
drop-down list box.
[Default value]
Low left
Font Border
Enable to bold the font
[Setting method]
Enable or disable
[Default value]
Disable
