UNE srl Via Modena, 48/E 42015 Correggio (RE) Italia
Tel. +39 0522 693566 – [email protected] – https://unesrl.com
7
DETAIL: ALARM INV0
VERIFY
Figure 9 - Inverter
alarm details
From section INV0 it is possible to specifically identify the inverter
alarms. The reading must be done from the bottom right to the left to
go up.
Check that in “INV0” the bitmap alarm is all 0.
DETAIL: ALARM MPPT
VERIFY
Figura 10 - Controller alarm details
To check the communication of the controllers, select the
CONT0,
CONT1 and CONT2
boxes (depending on whether you have 1 2 or 3
controllers) if it is day, check that the variables in the side column are
set:
CONT0
CONT1
CONT2
DETAIL: ALARM BATTERIES
VERIFY
Figura 11 - Battery alarms detail
To check the communication of the batteries, select the boxes
BATT0
and BATT1
(depending on whether you have 1 or 2 batteries) and
check that the data is regularly updated:
BATT0
BATT1