umbratek ADRA HR Series, Руководство пользователя

Страница: 19 / 52

EN Ver. 0.2.0
19 / 52 © 2022 Umbratek All Rights Reserved.
Umbratek Assistant
Preparations
As an app dedicatedly designed for Umbratek Components. Compatible with the ADRA Series, FLXI
Series, Communication Modules and more. Umbratek Assistant is compatible with a variety of
operating systems, including Windows, MacOS and Linux.
1.
Download and install Umbratek Assistant from the official website:
https://www.umbratek.com/download-center
2. Select a tool based on the interface type of the actuator (USB-RS485 / USB-CAN / EtherNet-RS485 /
EtherNet-CAN), connect the actuator to the computer. DataLink series high-speed modules are
available from Umbratek
3. Start Umbratek Assistant
4. Scan and connect the ADRA actuator to enter the control interface, see “ actuator connection ” for
details
5.
Use Assistant to test, tune, calibrate, or upgrade the actuator, as described in the following sections.
Actuator Connection
1. Select USB or EtherNet to connect the communication device to the computer. (Figure: Assistant
connection interface 1)
2.
Click "Scan", the software will automatically identify the computer port, actuator ID, actuator baud
rate. When the actuator is identified, it will be displayed in a list. The ID, port, and baud rate of the
interface will also be automatically set. (Figure: Assistant connection interface 2)
3.
Click Connect to connect the first actuator in the list.
Note: If you use the encoder battery for the first time or replace/plug the encoder battery for the first