Ulvac STC-1C Series, Инструкция по эксплуатации

Страница: 23 / 42

Super Trap Temperature Controller (STC-1Cseries) Instruction Manual
ULVAC CRYOGENICS INCORPORATED 9
6. Installation
6.1. Installation site
○
Install STC-1C series in the site under proper usage environment.
CAUTION
Avoid using STC-1C series in these places.
・
Where flammable gas, corrosive gas, oil mist and particles that can
deteriorate electrical insulation are generated, or are abundant.
・
Where the temperature is below 0
º
C or above 40
º
C.
・
Where the relative humidity is 80%RH or below dew point.
・
Where highly intense vibration or impact is generated or transferred.
・
Near high voltage power lines or where inductive interference can affect the
operation of the product.
6.2. Installation
Please see panel cut dimensions of figure 6-1 below, and machine the mounting
hole on your cabinet panel. Insert STC-1C series from the front panel into the
interior of the mounting hole completely, and fix it with two clamps.
Figure 6-1
Panel cut dimensions and installation method
93
93
Ｋ
Panel of User's Cabinet
（ Panel cut ）
Clamp holders mounting positions
（ Front ）
Tighten with a Phillips-head screwdriver.
（ Inside of user's cabinet ）