Ulvac DOP-181S Series, Инструкция по эксплуатации

Страница: 13 / 31

１
1. Product Outline
1.1 Purpose of Use and Prohibitions
This product is a piston dry vacuum pump employing reciprocating motion of cup packing.
In addition, please do not use it in a simple substance because integration is for exclusive
use. Observe the following prohibitions to ensure normal operation of the pump.
Prohibitions
(1) This pump is only for vacuum pumping, and must not be pressurized.
(2) Do not re-sell, repair, or modify this pump without the approval of the manufacturer.
(3) This pump is not designed to be corrosion-proof. Use it only with dry air and N2 at
normal temperature, or gases of equivalent characteristics.
(4) Do not attempt to evacuate gases containing particles, dust, water, or corrosive gases.
(5) Do not operate the pump for long periods at near-atmospheric pressure.
1.2 Specifications
Table 1.1 Product Specifications (DOP-181S series)
Mode DOP-181SA DOP-181SB DOP-181SC DOP-181SD DOP-181SE
Pumping
speed
(L/min) 180(50Hz) / 200(60Hz)
Ultimate
pressure
(kPa) 10
Motor
1 Phase 400W 4Poles
3 Phase
400W 4Poles
fitted with an automatic reset thermal protector
Amb.
Temp.
(
℃
) 7
– 40
10
– 30
7
– 40
frequency (Hz)
50 / 60 50 / 60 50 / 60 50 / 60 50 / 60 50 / 60
Voltage (V)
100 115 200 220 200-230 200-220
current (A)
6.3/5.8 5.3/5.1 3.2/2.9 2.9/2.6 3.1/2.9 2.0-1.9/1.9-1.8
Noise level dB(A)
<65dB (at Ultimate pressure , 1m)
Inlet Port
Rc3/8
Outlet port
Weight (kg) 12
Dimensions
(mm) 172×266×235 162×266×235 160×266×235
(W×L×H)
Over Voltage
Category
Ⅱ
Pollution Degree
2
Insulation Category Class 1
!
Warning
!
Note